KJ421(CYTJ45/2) Hydraulic Tunnelling Drilling Rig

  • Drilling method:Tophammer

  • Hole diameter:42 mm - 102 mm

  • Climbing capacity:≤14°

  • Operating range:4*4-8.7*7.8m

  • Engine:130hp/96kW

Category: Tunneling jumbos

Product Description

Drill the blast hole and rock bolting in a vertical,inclined and horizontal way;Suitably qualified for the drilling of tunnels whose section falls in the range of 16-68m².

  •  Balanced layout and the articulated chassis of four-wheel drive ensure the flexible,fastand safe driving in the narrow tunnel;

  • The stepped piston is used for the high-frequency impacting rock drill and this can improve the transmission efficiency of impact wave and drilling speed and reduce the consumption of drilling tools and make it in good condition;

  • Considerable space and automatic functions enable the driver to concentrate on drilling in a safe,fast and accurate manner;

  • All the relevant parts are kept in good protection,meanwhile easy to maintain.

  • It can be equipped with an enclosed cab selectively.


Technical Parameters of KJ421(CYTJ45/2) Tunneling Jumbo

Dimensions and Weight
Length13000mm
Width2200mm
Height2400/3100mm
Weight22000 kg
Travelling speed, level10 km/h
Climbing capacity25% (14°)
Safety protection
Noise level<100 dB(A)
Lifting safety roofMeet the requirements of FOPS and ROPS.
Drilling system
Rock drilling2×HC95LMH/YYG22U
ShankR38/T38
Impact power21KW/22KW
Frequency62Hz/53Hz
Hole diameterΦ42-102mm
Rolling of the propelling beam360°
Feed extension1600mm
ModelK40
FormAutomatic leveling
Extension of drill boom1800mm
Electric Hydraulic pump unit
Electric motor2×75kw
Impact- propelling-BoomVariable axial piston pump
RotationGear pumps
Filter precision10μ
Hydraulic oil tank400L
Hydraulic coolerWater cooler
Working pressure380V
Frequency50Hz
Starting methodStar - triangle
Specifications of cable3×120+3G25
Air and water system
Air Compressor1×DLGF1.5/8-11(B)
Capacity1.55m3/min
Pressure8bar
Device of shank lubricationElectrical pulse lubrication pump
Air consumption for lubrication2×0.3m3/min
Oil consumption for lubrication2×180-250g/h
Power of Water Pump7.5kw
Pump Capacity10m3/h
Chassis
Diesel engineB3.9CS4-130C  96kW/2500rpm
TransmissionHydraulic torgue converter+gearbox
Travel brakeWet bridge brake
Parking brakeMechanical brake
Fuel tank120L


KJ421diagram

Leave a Review